본 연구에서는 건축구조기준에 따라 설계된 RC전단벽 구조시스템에 대하여 비선형 해석 모델을 확립하고, 대한건축학회 공동주택 성능기반 내진설계 지침에 따라 내진성능 평가를 진행하였...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=T14791211
서울 : 세종대학교 대학원, 2018
학위논문(석사) -- 세종대학교 대학원 대학원 , 건축구조 , 2018.02
2018
한국어
624.1772
서울
26cm
세종대학교 논문은 저작권에 의해 보호받습니다.
Seismic Performance Evaluation of Apartment Buildings Considering Shear Wall and Coupling Beam
지도교수:이기학
참고문헌: p.
I804:11042-200000009835
0
상세조회0
다운로드본 연구에서는 건축구조기준에 따라 설계된 RC전단벽 구조시스템에 대하여 비선형 해석 모델을 확립하고, 대한건축학회 공동주택 성능기반 내진설계 지침에 따라 내진성능 평가를 진행하였...
본 연구에서는 건축구조기준에 따라 설계된 RC전단벽 구조시스템에 대하여 비선형 해석 모델을 확립하고, 대한건축학회 공동주택 성능기반 내진설계 지침에 따라 내진성능 평가를 진행하였다. 비선형 구조 해석 프로그램으로 PERFORM-3D를 사용하였으며, 모델링 검증을 위하여 탄성 설계 해석을 실시한 MIDAS Gen의 모델링과 고유주기 및 연직하중을 비교하였다. 구조물의 지진거동을 보다 명확히 예측하고자 확립된 해석 모델을 바탕으로 비선형 정적 해석과 비선형 동적 해석을 실시하였다. 비선형 정적 해석을 실시한 결과, 해당 건축물은 지진하중에 대해 여유 강도가 기준 이상으로 판단되었으며, 최대 층간 변위비는 허용 최대 층간 변위비인 0.015hsx (hsx : x층의 층고)를 초과하지 않아 목표 성능을 만족하는 것으로 판단하였다. 또한 7개의 지반운동을 고려한 비선형 동적 해석을 수행하여 구조물의 시간에 따른 이력거동을 확인하였다. 목표 내진성능 수준을 만족하는지 판단하기 위하여 구조물의 최대 층간 변위비와 벽체의 소요전단강도 및 압축변형률에 대한 기준을 검증하였다. 최대 층간 변위비와 압축변형률은 목표성능을 만족하였으나, X방향에서 가장 세장한 W6 벽체의 소요전단강도가 1층에서 7층까지 목표 성능을 초과하여 보강이 필요한 것으로 판단하였다. 보강 방안으로 횡하중에 대한 수평철근비를 증가시켰으며 재해석한 결과 목표성능을 만족하는 것으로 판단하였다.
다국어 초록 (Multilingual Abstract)
This paper evaluates the performance based design of apartment building considering shear wall and coupling beams. In this study, pushover analysis and nonlinear dynamic analysis using 7 ground motion were performed. The target performance level of ap...
This paper evaluates the performance based design of apartment building considering shear wall and coupling beams. In this study, pushover analysis and nonlinear dynamic analysis using 7 ground motion were performed. The target performance level of apartment building is determined based on the importance specified in KBC2016. The target seismic performance of the apartment building corresponding to the seismic class (Class I) was selected to be above the life safety level. Pushover analysis was performed to confirm the performance satisfaction. The maximum inter-story drift ratio, over strength factor and formation of performance point were examined by using pushover analysis. The maximum inter-story drift ratio and the required shear strength and the compressive strain of the wall were investigated in the nonlinear dynamic analysis. Result of analysis shown that the building satisfies all the target performance.
목차 (Table of Contents)