• Ⅰ. INTRODUCTION
• Ⅱ. MATERIALS AND METH
• Ⅲ. RESULTS
• Ⅳ. DISCUSSION
• Ⅴ. CONCLUSION
• Ⅵ. REFERENCES

1 박인출, "치아와 심미" 307 : 850-856, 1994

2 박지만, "치과용 CAD/CAM 전부도재시스템의 현황" 한국생체재료학회 12 (12): 9-13, 2008

3 오승한, "치과심미수복용 세라믹의 최신 특성평가" 대한치과의사협회 51 (51): 6-11, 2013

4 김정숙, "최신 심미 보철 system과 임상적 활용" 31 (31): 67-76, 2009

5 김희철, "체어사이드 CAD/CAM에서 사용하는 세라믹 소재" 23 (23): 16-26, 2014

6 이상혁, "지르코니아, 유리침투알루미나 및 PFM 전부관 시스템의 파절 경향에 관한 비교연구" 대한치과보철학회 50 (50): 235-242, 2012

7 이승규, "지르코니아 수복물의 임상적 적용 방법" 20 (20): 27-38, 2011

8 권태엽, "심미수복용 레진" 대한치과의사협회 51 (51): 12-17, 2013

9 이승규, "심미 수복 - 같은 결과, 다른 접근세라믹을 이용한 전통적인 접근법" 대한치과의사협회 51 (51): 595-603, 2013

10 구본경, "소결조제를 달리해 상압 반응소결로 제조된 AlON의 투명도" 한국세라믹학회 46 (46): 392-396, 2009

11 재료연구소, "방탄 윈도우용 100mm급 투명 다결정 세라믹, 산업통상자원부 핵심 방산소재 기술개발사업, 2013~2020"

12 Lin JN, "Wetting reaction between lithium fluoride and barium titanate" 72 (72): 1709-1712, 1989

13 Tsukuma K, "Transparent titania-yttria-zirconia ceramics" 5 : 1143-1144, 1986

14 Klimke J, "Transparent tetragonal yttria-stabilized zirconia ceramics: Influence of scattering caused by birefringence" 94 (94): 1850-1858, 2011

15 Anselmi-Tamburini U, "Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure pulsed electric current sintering" 17 : 3267-3273, 2007

16 Goldstein A, "Transparent MgAl₂O₄ spinel from a powder prepared by flame spray pyrolysis" 91 (91): 4141-4144, 2008

17 Tsukuma K, "Transparent 8 mol% Y₂O₃-ZrO₂(8Y) ceramics" 91 (91): 813-818, 2008

18 Spyropoulou PE, "Translucency of shaded zirconia core material" 105 (105): 304-307, 2011

19 Wang F, "Translucency of dental ceramics with different thicknesses" 110 (110): 14-20, 2003

20 Matsuzaki F, "Translucency and flexural strength of monolithic translucent zirconia and porcelain layered zirconia" 34 (34): 910-917, 2015

21 Zhao Y, "Thermodynamic properties of the MgAl₂O₄-MnAl₂O₄ spinel solid solution" 26B : 1013-1017, 1995

22 Rhee SK, "Theoretical base and experimental techniques for determination of surface energies of ceramic materials" 58 (58): 441-446, 1975

23 Suarez G, "Texture development in 3 mol% yttria-stabilized tetragonal zirconia" 44 : 1802-1805, 2009

24 Meir S, "Synthesis and densification of transparent magnesium aluminate spinel by SPS processing" 92 (92): 358-364, 2009

25 Kingery WD, "Surface segregation of aluminum (spinel precipitation) in MgO crystals" 59 (59): 239-241, 1976

26 Rozenburg K, "Sintering kinetics of a MgAl2O4 spinel doped with LiF" 91 (91): 444-450, 2008

27 Miyazaki T, "Review: Current status of zirconia restoration" 57 : 236-261, 2013

28 Guha JP, "Reaction during sintering of barium titanate with lithium fluoride" 69 (69): C193-C194, 1986

29 Harris DC, "Materials for Infrared Windows and Domes:Properties and Performance" SPIE Press 12-62, 1999

30 Tsubakino H, "Martensite transformation behaviour during isothermal ageing in partially stabilized zirconia with and without alumina addition" 12 : 196-198, 1993

31 Zhang Y, "Making yttria-stabilized tetragonal zirconia translucent" 30 : 1195-1203, 2014

32 Deuk Yong Lee, "Kinetic study of La₂O₃-Al₂O₃-SiO₂ glass infiltration into spinel preforms" 한국결정성장학회 12 (12): 31-35, 2002

33 Huang JL, "Investigation of high-alumina spinel: Effect of LiF and CaCO₃addition" 80 (80): 3237-3241, 1997

34 Huang JL, "Investigation of high aluminaspinel:effects of LiF and CaCO₃addition (part 2)" A259 : 1-7, 1999

35 "ISO 6872. Dentistry - Ceramic materials"

36 오상천, "IPS Empress를 이용한 심미수복" 379 : 1122-1126, 2000

37 Zhang F, "Highlytranslucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation" 16 : 215-222, 2015

38 Chiang YM, "Grain-boundary migration in nonstoichiometric solid solutions of magnesium aluminate spinel: II. Effects of grain-boundary nonstoichiometry" 73 (73): 1153-1158, 1990

39 Khenata R, "Full-potential calculations of structural, elastic and electronic properties of MgAl₂O₄and ZnAl₂O₄compounds" 344 : 271-279, 2005

40 Asish G, "Fracture resistance of a transparent magnesium aluminate spinel" 74 (74): 1624-1630, 1991

41 Ibram G, "Formation and densification behavior of MgAl2O4 Spinel: The influence of processing parameters" 91 (91): 1-7, 2008

42 Counts WE, "Fluoride model systems:11, The binary systems CaF₂-BeF₂, MgF₂-BeF₂, and LiF-MgF₂" 36 (36): 12-17, 1953

43 Gary G, "Evaluation of hot pressing and hot isostastic pressing parameters on the optical properties of spinel" 88 (88): 2747-2751, 2005

44 Suarez G, "Effect of starting powders on the sintering of nanostructured ZrO₂ceramics by colloidal processing" 10 : 1-8, 2009

45 Zhang H, "Effect of sintering temperature on optical properties and microstructure of translucent zirconia prepared by high-pressure spark plasma sintering" 12 : 1-6, 2011

46 Dericioglu AF, "Effect of grain boundary microcracking on the light transmittance of sintered transparent MgAl₂O₄" 23 : 951-959, 2003

47 DeukYongLee, "Effect of calcination temperature on mechanical properties of spinel-glass dental composites" 한국결정성장학회 12 (12): 234-239, 2002

48 Hart PE, "Densification mechanisms in hot-pressing of magnesia with a fugitive liquid" 53 (53): 83-86, 1970

49 Villalobos GR, "Degradation of magnesium aluminum spinel by lithium fluoride sintering aid" 88 (88): 1321-1322, 2005

50 Mazdiyasni KS, "Cubic phase stabilization of translucent yttria-zirconia at very low temperature" 50 (50): 532-537, 1967

51 Vichia A, "Color related to ceramic and zirconia restorations: A review" 27 : 97-108, 2011

52 Rozenburg K, "Chemical interaction between LiF and MgAl2O4 spinel during sintering" 90 (90): 2038-2042, 2007

53 Reimanisw I, "A review on the sintering and microstructure development of transparent spinel" 92 (92): 1472-1480, 2009