
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
혼합법칙을 이용한 황동 개재물이 있는 Al 정사각판의 고유진동수 해석
이윤복,이세훈,이영신,Lee, Youn-Bok,Lee, Se-Hoon,Lee, Young-Shin 한국전산구조공학회 2006 한국전산구조공학회논문집 Vol.19 No.4
The natural frequencies of Al square plates with a brass inclusion were analyzed by the rule of mixtures. The rule of mixtures is the method to derive natural frequency mutiplying effective inplane wane speed and nondimensional frequency parameters. Numerical models were Al square plates with an inclusion with cantilever type, 2 clamped edge-2 free edge type, 3 clamped edge-1 free edge type and fully clamped edge type. In cantilever type plates, 2 clamped edge-2 free edge type plates and 3 clamped edge-1 free edge plates with an inclusion, good agreement within 10% obtained from rule of mixtures' results and numerical analysis results within inclusion area ratio 1/9. It was found that the natural frequencies of the cantilever type, 2 clamped edge-2 free edge type and 3 clamped edge-1 free edge type plates with an inclusion decrease as the size of inclusion increases when inclusion is located center of plates. And when the density of inclusion is less than the plates, natural frequency of plates with an inclusion increases as the size of inclusion increases.
李允福 韓日經商學會 2001 한일경상논집 Vol.22 No.-
본 논문의 목적은 Balassa-Samuelson의 생산성격차가설에 기초하여 도출된 모형을 이용하여, 구매력평가가 성립하는지 어떤지를 한국을 대상으로 하여, 2단계공적분검정에 의하여 실증적으로 분석하는 데 있다. 구매력평가가 성립하는지에 대한 검정의 순서와 방법은 다음과 같다. 먼저 本槁의 모형에 있어서 명목환율과 상대가격비, 양국의 부문간생산성격차, 그리고 외국과 자국의 상대교역조건에 대해서 공적분검정을 실시한다. 만약 공적분관계의 존재가 검정되면 그것들 사이에 장기균형관계가 존재한다고 해석할 수 있다. 다음으로 이러한 장기균형관계가 존재하는 것을 전제로 하여 명목환율과 상대가격비 사이에 구매력평가의 비례성의 조건을 나타내는 구조제약하에서 검정을 실시한다. 이러한 2단계의 공적분검정에 의해서 구매력평가가 성립하는지 어떤지가 판정되는 것이다. 미국의 달러와 일본의 엔에 대한 한국 원의 명목환율을 이용한 실증분석의 결과 원 ㆍ 달러의 경우에는 구매력평가가 성립하고 있는 것이 검정되었지만 원 ㆍ 엔의 경우에는 구매력평가가 성립하지 않았다. Key words : Purchasing power parity, differential productivity hypothesis, cointegration tests
IEEE 802.11a용 적층형 LTCC 대역통과 여파기
이윤복,김호용,이홍민,Lee Yun-Bok,Kim Ho-Yong,Lee Hong-Min 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.2
Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.